Home > EV Charging Station >

Outdoor Electric Vehicle AC EV Charging Station 3 Phase 22kw EV Charger With 5M Cable

Product Categories

Outdoor Telecom Cabinet [495]
Telecom Rectifier System [121]
Outdoor Battery Cabinet [44]
Pole Mount Enclosure [44]
Outdoor Wall Mounted Cabinet [27]
Outdoor Cabinet Air Conditioner [113]
Kiosk Air Conditioner [19]
Environment Monitoring System [22]
Enclosure Heat Exchanger [26]
Base Station Cabinet [74]
Thermoelectric Air Conditioner [9]
Power Distribution Unit [16]
Distribution Frame [10]
Industrial Power Supplies [18]
EV Charging Station [13]

Tianjin Estel Electronic Science and Technology Co.,Ltd

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

Outdoor Electric Vehicle AC EV Charging Station 3 Phase 22kw EV Charger With 5M Cable

Name: Outdoor Electric Vehicle AC EV Charging Station 3 Phase 22kw EV Charger With 5M Cable
Brand: ESTEL
Price: 1 USD

Best Outdoor Electric Vehicle AC EV Charging Station 3 Phase 22kw EV Charger With 5M Cable wholesale

Brand Name : ESTEL

Model Number : E3P-22K-A2-16A-EU01

Certification : CE,ROSH,FCC

Place of Origin : Shenzhen, China (Mainland)

MOQ : 1

Price : negotiation

Payment Terms : L/C,D/A,T/T, Western Union, Paypal, etc

Supply Ability : 50,000 sets per month

Packaging Details : 15-20 working days

Delivery Time : 40 Days

Input Voltage : 3 phase 400V 32A 50/60Hz

Output Voltage : 3-phase 400V

Output power : 11kW*2

Output current : 16A*2

Charging gun : 1 gun (ccs2)+1socket

Operating temperature : -30 ° C ~ +50 ° C

Communication : WiFi/4G

Protection level : IP54

Contact Now

Outdoor Electric Vehicle AC EV Charging Station For Electric Car 44 Kw Charger With 5M Cable

1.Technical Parameters

The AC charger is in compliance with SAE J1772, IEC 62196, GB/T20234.

The communication protocol with central management system (CMS) is in compliance with OCPP 1.6 based on ARM architecture and Linux / Android platform.

Outdoor Electric Vehicle AC EV Charging Station 3 Phase 22kw EV Charger With 5M Cable

2.Specification

Item	Specification	E3P-22K-A2-16A-EU01
Input	Input voltage	3 phase 400V 32A 50/60Hz
Output	Output voltage	3-phase 400V
	Output power	11kW*2
	Output current	16A*2
Profile	Charging gun	1 gun (ccs2)+1socket
	Installation method	Wall-mounted Type or Stand Type
	Cable length	5m
	Operating temperature	-30 ° C ~ +50 ° C
	Storage temperature	-40 ° C ~ +70 ° C
	Working humidity	5%~95%
	Communication	WiFi/4G
	Protection level	IP54
	Safety standard	IEC 61851-1:2017
	Interface protocol	OCPP 1.6
	Emergency Stop	Yes
	CE certificated	Yes
	Security design	Over/under voltage protection, overload protection, short circuit protection, current leakage protection, grounding protection, over temp protection, lightning surge protection, topple & fall down protection

3.Service environment

Operation temperature: -20⁰C...+60⁰C
RH: 5%...95%
Attitude: <2000m
Installation environment: concrete foundation without strong magnetic interference. An Awning is recommended.
Peripheral space: >0.1m

4.Dimension Diagram

5.installation condition

The charger should be installed on a flat concrete foundation, with a cable entrance reserved.

The foundation is required at least 150mm above the ground and the vertical inclination is less than 5%.

Fix the bottom of the charger by four M14 screws embedded in the foundation.

Keep at least 100cm spacing around the charger for heat dissipation and operatio

An Awning is recommended

Electrical connection

The electric supply system is 230V single phase. Connect the external cable to the internal terminals according to the symbol, L, N and PE (earthing).

6.General troubleshooting

Trouble shooting No.	Fault phenomenon	Solution
1.	Indicator light not bright	I. Check the power supply wiring. II. Open the door to check the 3-pole connector of the control board J12 contact. III. Check the 2A fuse of the control board by multimeter.
2.	Unable to charge	I. Check the emergency stop button. If it is pressed, release it in the direction of the arrow. II. Check the red indicator light. If it’s in steady light, that means the charging point is in fault. Then open the circuit breaker firstly and eliminated the corresponding fault. After the fault is eliminated, close the circuit breaker and wait for 1 min to restart the charging point.
3.	Unable to read RFID card (if any)	Open the front door and check whether the 4-pole signal terminal of the card reader is in good contact.
4.	Electricity meter communication failure (if any)	Open the rear door and check whether the RS485 connector of the meter is in good contact.
5.	Upriver power supply tripping frequently	I. Check whether the upriver circuit breaker is in a good condition. II. Replace the upriver circuit breaker to a larger rated current if the rated current is too small.
Warning: Withdraw the charging connector before electrical maintenance work! Be sure to cut off the circuit breaker of the charger cabinet and the upriver circuit breaker before electrical maintenance work!

7. Warming Alarm

No.	Sound	Meaning
1	One short beep	Charging process finished
2	Two short beeps *	Contactor release fault
3	Three short beeps *	Protection earthing disconnects between charging point and EV
4	One long and one short beeps*	CP and PE short circuit
5	One long and two short beeps*	Power line DC residual current alarm
6	One long and three short beeps	Charging inquiry stopped by EV
7	Steady beep	Emergency button pressed
Remark: *user stop the charging process immediately and ask for emergency service.

8. DC Charging Station Details

Outdoor Electric Vehicle AC EV Charging Station 3 Phase 22kw EV Charger With 5M Cable

9. Project case presentation

Outdoor Electric Vehicle AC EV Charging Station 3 Phase 22kw EV Charger With 5M Cable

10.Packing

Outdoor Electric Vehicle AC EV Charging Station 3 Phase 22kw EV Charger With 5M Cable

Product Tags: